Misc Bearings, Bushings, Grease Cap

Caster Yoke Grease Cap.

Part #: 9-10790

• Size: 3/4" ID 1.78" OD

9/16" Edger Bearing

Part #: 9-1264

• OEM Replacement This part is aftermarket equipment designed to replace the original manufacturer's part numbers specified here. It is manufactured using high-quality materials, to the same specifications as the original part.: Oregon 45-162, Stens 225-243, Sunbelt B1SB1264
• Size: ID 9/16", OD 1-3/8", Height 7/16"

.3939 ID Edger Bearing

Part #: 9-1266

• OEM Replacement This part is aftermarket equipment designed to replace the original manufacturer's part numbers specified here. It is manufactured using high-quality materials, to the same specifications as the original part.: Oregon 45-620, Stens 225-268, Sunbelt B1SB1266
• Size: ID .3939", OD 1.1811", Height .3543"

Heavy Duty Angular contact Ball Bearing

Part #: 9-13414

• OEM Replacement This part is aftermarket equipment designed to replace the original manufacturer's part numbers specified here. It is manufactured using high-quality materials, to the same specifications as the original part.: Hustler 786103, Oregon 45-065, Oregon 45-234
• Height: 1/2"
• Diameter: ID 3/4", OD 1-3/8"

Heavy Duty Angular contact Ball Bearing

Part #: 9-13418

• OEM Replacement This part is aftermarket equipment designed to replace the original manufacturer's part numbers specified here. It is manufactured using high-quality materials, to the same specifications as the original part.: Dixie Chopper 400275, Oregon 45-258
• Height: 1/2"
• Diameter: ID 5/8", OD 1-3/8"

Spindle Bearing 30 X 62 Mm

Part #: 9-14477

• OEM Replacement This part is aftermarket equipment designed to replace the original manufacturer's part numbers specified here. It is manufactured using high-quality materials, to the same specifications as the original part.: Bad Boy 037-8001-00
• Size: ID 1.18" (30mm), OD 2.44" (62mm), Height 15/16" (23.8mm)

Seal Guard 3/4" Bore/Pair

Part #: 9-15828

Spanner Bushing For Badboy

Part #: 9-15886

• OEM Replacement This part is aftermarket equipment designed to replace the original manufacturer's part numbers specified here. It is manufactured using high-quality materials, to the same specifications as the original part.: Bad Boy 025-5202-00

Ball Bearing For Bad Boy

Part #: 9-15897

• OEM Replacement This part is aftermarket equipment designed to replace the original manufacturer's part numbers specified here. It is manufactured using high-quality materials, to the same specifications as the original part.: Bad Boy 022-7010-00, Bearing 204RY2, John Deere AA21480, Toro 108-9017, Toro 120-5378, Toro 93-4237
• Size: ID 5/8" (15.88mm), OD 1-3/4" (44.45mm), Height 3/4" (19.05mm)

Ball Bearing For Bad Boy

Part #: 9-15912

• OEM Replacement This part is aftermarket equipment designed to replace the original manufacturer's part numbers specified here. It is manufactured using high-quality materials, to the same specifications as the original part.: Ariens 05416000, Ariens 05418200, Ariens 5418200, Bad Boy 010-1050-00, Gravely 032050, Gravely 05416000, Husqvarna 606000186, Murray 85086, Stens 230-221, Trailmate 16427, Noma 85086
• Size: ID 1" (25.40mm), OD 2" (50.80mm), Height.560" (14.22mm)

Wheel Bearing Castel Garden/Ggp

Part #: 9-15952

• OEM Replacement This part is aftermarket equipment designed to replace the original manufacturer's part numbers specified here. It is manufactured using high-quality materials, to the same specifications as the original part.: Castelgarden 125122200/2, Castelgarden 25122200/2, Castelgarden 25222200/0, GGP 125122200/2, GGP 25122200/2, GGP 25222200/0

Bronze Bushing For Bad Boy

Part #: 9-15964

• OEM Replacement This part is aftermarket equipment designed to replace the original manufacturer's part numbers specified here. It is manufactured using high-quality materials, to the same specifications as the original part.: Bad Boy 032-5051-00

Bronze Bushing For Bad Boy

Part #: 9-15965

• OEM Replacement This part is aftermarket equipment designed to replace the original manufacturer's part numbers specified here. It is manufactured using high-quality materials, to the same specifications as the original part.: Bad Boy 032-5056-00

Flanged Deck Arm Bushing For Bad Boy

Part #: 9-15966

• OEM Replacement This part is aftermarket equipment designed to replace the original manufacturer's part numbers specified here. It is manufactured using high-quality materials, to the same specifications as the original part.: Bad Boy 032-5057-00

K&S T16276 Bronze Bushing

Part #: 9-3216

• Color: Bronze
• OEM Replacement This part is aftermarket equipment designed to replace the original manufacturer's part numbers specified here. It is manufactured using high-quality materials, to the same specifications as the original part.: K & S Trim All 3999, K & S Trim All T16276, Oregon 45-019, Stens 225-276, Sunbelt B1SB3216
• Size: ID 1/2", OD 3/4", Height 3/4", Flange OD 15/16"

1" X 2-7/16" Sealed Bearing

Part #: 9-3217

• OEM Replacement This part is aftermarket equipment designed to replace the original manufacturer's part numbers specified here. It is manufactured using high-quality materials, to the same specifications as the original part.: Bad Boy 037-6024-00, Bobcat/Ransomes 35008N, Bunton-Goodall PL0609, Bunton-Goodall PL4611, Exmark 1-303057, Exmark 1-303057, Exmark 1-303543, Exmark 303543, Ferris 46363-5, Hustler 783555, John Deere 9467, MTD 741-05022, MTD 741-05022A, MTD 941-05022, MTD 941-05022A, Oregon 45-220, Prime Line 7-03104, Scag 483303, Snapper/Kees 1-9125, Snapper/Kees 7019125, Snapper/Kees 7019125YP, Snapper/Kees 7-6510, Stens 230-086, Stens 230-089, Stens 230-090, Sunbelt B1CO17
• Size: ID 1", OD 2-7/16", Height 21/32"

1/2" X 1-1/8" Bearing

Part #: 9-324

• OEM Replacement This part is aftermarket equipment designed to replace the original manufacturer's part numbers specified here. It is manufactured using high-quality materials, to the same specifications as the original part.: Oregon 45-112, Prime Line 7-07475, Stens 215-012, Sunbelt B1SB324
• Size: ID 1/2", OD 1-1/8"

1/2" X 1-3/8" Bearing

Part #: 9-325

• OEM Replacement This part is aftermarket equipment designed to replace the original manufacturer's part numbers specified here. It is manufactured using high-quality materials, to the same specifications as the original part.: Oregon 45-012, Prime Line 7-07476, Stens 215-020, Stens 230-241, Sunbelt B1SB325
• Size: ID 1/2", OD 1-3/8"

5/8" X 1-3/8" Bearing

Part #: 9-326

• OEM Replacement This part is aftermarket equipment designed to replace the original manufacturer's part numbers specified here. It is manufactured using high-quality materials, to the same specifications as the original part.: John Deere PT8894, Oregon 45-058, Prime Line 7-07478, Stens 215-038, Stens 215-061, Stens 215-370, Sunbelt B1SB326
• Size: ID 5/8", OD 1-3/8"

3/4" X 1-3/8" Bearing

Part #: 9-327

• OEM Replacement This part is aftermarket equipment designed to replace the original manufacturer's part numbers specified here. It is manufactured using high-quality materials, to the same specifications as the original part.: Cub Cadet 384881R93, MTD 741-0180, MTD 741-0262, MTD 9410180, Oregon 45-034, Prime Line 7-04133, Prime Line 7-04232, Prime Line 7-04292, Prime Line 7-07477, Snapper/Kees 1-1807, Snapper/Kees 7011807, Snapper/Kees 7011807YP, Stens 215-046, Stens 215-079, Stens 215-210, Stens 230-128, Sunbelt B1SB327, Toro 11-0513, Toro 25-1210
• Size: ID 3/4", OD 1-3/8"

3/4" X 1-3/8" Sealed Bearing

Part #: 9-328

• OEM Replacement This part is aftermarket equipment designed to replace the original manufacturer's part numbers specified here. It is manufactured using high-quality materials, to the same specifications as the original part.: John Deere AM118315, John Deere AM35443, Oregon 45-000, Prime Line 7-04133, Prime Line 7-04232, Prime Line 7-04292, Prime Line 7-07477, Snapper/Kees 1-1807, Snapper/Kees 2-6693, Snapper/Kees 7011807, Snapper/Kees 7011807YP, Snapper/Kees 7026693, Stens 215-046, Stens 215-079, Stens 215-210, Stens 230-128, Sunbelt B1SB328, Toro 11-0513
• Size: ID 3/4", OD 1-3/8", Height 17/32"

1/2" X 5/8" Nylon Bushing

Part #: 9-329

• OEM Replacement This part is aftermarket equipment designed to replace the original manufacturer's part numbers specified here. It is manufactured using high-quality materials, to the same specifications as the original part.: Oregon 45-080, Stens 215-160, Sunbelt B1SB329
• Size: ID 1/2", OD 5/8", Height 5/8", Flange OD 3/4"

3/8" X 1/2" Steel Wheel Reducer

Part #: 9-330

• OEM Replacement This part is aftermarket equipment designed to replace the original manufacturer's part numbers specified here. It is manufactured using high-quality materials, to the same specifications as the original part.: Stens 215-178, Sunbelt B1SB330
• Size: ID 3/8", OD 1/2", 2-3/16" Length

7/16" X 1/2" Steel Wheel Reducer

Part #: 9-331

• Size: ID 7/16", OD 1/2", 2-3/16" Length